Buyers must know the four major processing techniques of plexiglass display racks

So far, plexiglass display racks are the most widely used display props in major shopping malls, large supermarkets, jewelry stores, etc. So, what methods are there when processing plexiglass display racks? Let's take a look at it together.

As the name suggests, the plexiglass display stand is made of plexiglass, which can be processed by woodworking machines under normal circumstances. The difference is that when using knives and saw blades, plexiglass processing is used. The common processes in the processing of plexiglass display racks are the following types:

1. According to processing
What is data processing? Data processing is the use of data to cut the material. It can cut straight or curved. Generally, a special saw blade is used for cutting, so that the cutting effect is very good.

2. Hot bending
In daily life, we will find a problem, that is, many plexiglass display racks are bent, why is this? Because the hot bending process is used here. The hot bender must be used when performing the hot bending process. When bending, the part of the sheet to be folded must be placed on the hot bender for baking and then bent on the edge of the table. After waiting for cooling, the angle is fixed to a curved shape.

3. Fold processing
When processing the plexiglass display rack with the fold method, it is first necessary to gather data, and then cut the board, straight cutting is also the most common method of cutting materials. Folding is a straight-line method of cutting plexiglass. The basic process is this, first place the ruler on the plate to be processed and cut, here to ensure that the edge of the ruler coincides with the cutting line, and then fix the ruler, so that it becomes a straight line. Then use a hook to drag along the edge of the ruler, draw a thin groove on the plate, when the depth of the thin groove and the thickness of the plate are about half, then put the plate on the edge of the table, pay attention to let the thin The groove coincides with the edge of the table, and at the same time, press the plate inside the table with one hand and press the plate outside the table with the other hand, so that the plexiglass will be neatly disconnected from the stack of hooks.